| CRANKCASE 1938-1948 | ||||
| ORDERNR | NAME | YEARUSED | PRICENOTEU | PRICEEU |
| 00-0015 | Screw oilpump cover front | 1938-1963 | € 0,84 | € 1,00 |
| 00-0203 | Fiber washer, oilway | upto 1977 | € 0,08 | € 0,10 |
| 00-0221 | Nut timingside crankshaft LH thread | 1938-1963 | € 7,14 | € 8,50 |
| 00-0230 | Nut, timingside shaft/flywheel | 1938-1953 | € 2,94 | € 3,50 |
| 00-0233 | Nut bigend | 1938-1966 | € 3,78 | € 4,50 |
| 00-0234 | Nut driveside shaft crank/flywheel | 1938-1966 | € 3,36 | € 4,00 |
| 00-0482 | Screw timing cover | upto 1977 | € 1,68 | € 2,00 |
| 00-0485 | Screw oilway | upto 1970 | € 3,36 | € 4,00 |
| 00-0570 | Woodruff key timingside gear | 1938-1963 | € 1,26 | € 1,50 |
| 00-0591 | Bolt rear oilpump cover | 1938-1963 | € 1,68 | € 2,00 |
| 00-0638 | Splitted ring exhaust camfollower | 1938-1948 | € 1,68 | € 2,00 |
| 00-0650 | Bronse bush timingside straight | upto 1951 | € 33,61 | € 40,00 |
| 00-0651 | Short camshaft bush | 1938-1963 | € 10,08 | € 12,00 |
| 00-0652 | Long camshaft bush | 1938-1963 | € 13,87 | € 16,50 |
| 00-0661 | Guide inlet camfollower | 1938-1948 | € 11,76 | € 14,00 |
| 00-0662 | Guide exhaust camfollower | 1938-1948 | € 16,81 | € 20,00 |
| 00-0670 | Camfollower | 1938-1948 | € 16,81 | € 20,00 |
| 00-0700 | Spring valvelifter | 1938-1948 | € 1,26 | € 1,50 |
| 00-0726 | Magneto drive gear on magneto | 1938-1954 | € 23,53 | € 28,00 |
| 00-0727 | Magneto drive gear on camshaft | 1938-1956 | € 25,21 | € 30,00 |
| 00-0755 | Drain pipe + nut engine breather | 1938-1966 | € 15,97 | € 19,00 |
| 00-0760 | Timing side shaft crank, 1 start | 1938-1946 | € 90,76 | € 108,00 |
| 00-0770 | Oilpump pindle, 1 start | 1938-1946 | € 56,30 | € 67,00 |
| 00-0773 | Front oilpump cover | 1938-1963 | € 15,97 | € 19,00 |
| 00-0835 | Disk engine breather | 1938-1966 | € 0,21 | € 0,25 |
| 00-0836 | Body engine breather | 1938-1966 | € 16,81 | € 20,00 |
| 01-0079 | Pin, guide oilpump spindle | 1948-1963 | € 2,10 | € 2,50 |
| 01-0138 | Guide for guidepin oilpump spindle | 1948-1963 | € 11,34 | € 13,50 |
| 01-0628 | Large shim between crank bearings | 1938-1954 | € 4,20 | € 5,00 |
| 01-0629 | Bush behind engine sprocket | 1938-1956 | € 5,46 | € 6,50 |
| 01-1913 | Oilpump spindle, 2 start | 1947 only | € 71,43 | € 85,00 |
| 01-1942 | Timingside shaft crank, 2 start | 1948-1953 | € 58,82 | € 70,00 |
| 01-2233 | Peg, securing timingside bush | 1938-1963 | € 0,42 | € 0,50 |
| 01-2967 | Oilpump spindle, 2 start | 1948-1963 | € 73,53 | € 87,50 |
| 01-5330 | Woodruff key | 1938-1966 | € 1,68 | € 2,00 |
| 01-6848 | Shim camshaft 0,5 mm | 1938-1966 | € 0,63 | € 0,75 |
| 01-7020C | Bigend assy, quality | 1946-1963 | € 134,45 | € 160,00 |
| 01-7191 | Crank ball bearing, 2 x upto 1954 | 1938-1966 | € 21,01 | € 25,00 |
| 01-7194 | Small shim between crank bearings | 1938-1954 | € 4,20 | € 5,00 |
| 01-7195 | Timingside gear | 1938-1963 | € 25,21 | € 30,00 |
| 01-7285 | Valve lifter | 1938-1948 | € 7,56 | € 9,00 |
| 01-7341 | Guide bolt oilpumpspindle | 1938-1947 | € 1,26 | € 1,50 |
| 01-7377 | Bronse bush timingside crank, short | 1938-1947 | € 12,61 | € 15,00 |
| 01-7489 | Bronse bush timingside crank step'd | 1952-1953 | € 54,62 | € 65,00 |
| 02-2563 | Driveside shaft crank | 1938-1956 | € 48,32 | € 57,50 |
| 06-7618 | Roller, bigend | € 0,42 | € 0,50 | |
| 21-7-5 | Drainbolt | 1938-1955 | € 3,78 | € 4,50 |
| 37-G8-E44 | Conrod, with small end | 1938-1948 | € 55,46 | € 66,00 |
| 37-G8-E44C | Conrod with bigend, exchange rod | 1938-1948 | € 156,30 | € 186,00 |
| 39-G8-E118 | Washer bigend/flywheel 7/8" hole | 1938-1949 | € 16,81 | € 20,00 |
| 423-350 | Stud/nut set crankcase 350cc | 1940-1948 | € 31,51 | € 37,50 |
| 423-500 | Stud/nut set crankcase 500cc | 1946-1948 | € 27,73 | € 33,00 |
| D8-E1818 | Washer bigend/flywheel 3/4" hole | 1938-1945 | € 16,81 | € 20,00 |
| EMW-411 | Fiber washer drainbolt | 1938-1955 | € 0,13 | € 0,15 |
| G8-E17C | Bigend assy. early 3/4 pin | 1938-1945 | € 159,66 | € 190,00 |
| TO CONTINUE GOTO PREVIOUS PAGE | ||||