DE ENGELSE MOTORWINKEL
| LATEST
ADDITIONS TO OUR PARTS RANGE: ALL PRICES INCLUDE VAT CUSTOMES OUTSIDE EU CAN DEDUCT 19 % FROM PRICE please note, also thousands and thousands of other parts in stock too. |
||
BSA |
||
| Rubber dualseat / frame pre unit B + A models € 8,00 | ||
| Washer frontfork late 60's 97-0431 € 1,00 | ||
| Rearwheel sprocket C12 € 51,00 | ||
| Nut timing side crankshaft pre unit B + M models € 2,00 | ||
| Oilseal crankshaft late GOLD STAR € 4,50 | ||
| Spring + ball in timing cover pre unit B + M models € 3,00 | ||
| Engine sprocket B31/M33 alternator models 19 and 17 Teeth € 70,00 | ||
| Tool bag A50 / A65 1960's € 9,00 | ||
| Stud frame /engine bottom A65 1960's € 6,00 | ||
| Kickstart crank non-foulding B31/A10 swingarm € 32.50 | ||
| Seat pin, pre unit swingarm models € 3.50 | ||
| Petroltank stiffening plate, pre unit swingarm models € 6,00 | ||
| Dual seat bolt rear, pre unit swingarm models € 2.50 | ||
| Tube oiltank top, pre unit swingarm models € 2.50 | ||
| Bolt oiltank top, pre unit swingarm models chrome, € 5,00 | ||
| Bolt rearbrake pedal, pre unit swingarm models € 2.50 | ||
| Rearbrake outrigger strap, rearwheel p/u swingarm halfwith hub € 11,00 | ||
| Bush in hub pre unit 65-5890 € 1,00 | ||
| Rearbrake anchor strap, p/u swingarm halfwith hub € 10,00 | ||
| Frontwheel anchor strap , pre unit € 19,00 | ||
| Frontbrake cable p/u GoldStar clipons € 28,00 | ||
| Throttle cable p/u GoldStar GP carb € 15,00 | ||
| Clutch cable p/u GoldStar clipons € 30,00 | ||
| Dipstick assy OIF A65 € 14,00 | ||
| Dipstick A65 gearbox € 3,00 | ||
| Long stud crankcase A65 late 21-1850 € 2,00 | ||
| Rear footrest rubber, square hole, with BSA logo € 3.50 | ||
| GENERAL | ||
| Rubber ribbed frametube / petroltank € 4,00 | ||
| Key for ingnition switch late 60's onwards blank FS series € 3.50 | ||
| Nut 5/16 x 26 BSCY flat € 0.50 | ||
| LOCTITE bearing retainer € 17,00 | ||
| Hexagon screw front cover competition magneto € 2.50 | ||
| Taper screw various magneto covers € 1,50 | ||
| Short alloy bell mouth 376 monobloc or 600 concentric € 5,00 | ||
| Set chrome vintage saddle springs € 17,00 | ||
| Allen bolt 2 BA x 3/4 stainless | ||
| Quick action (very quick) twist grip doherty € 24,00 | ||
| Primary chain 1/2 x 5/16 race quality € 46,00 | ||
| Taper screw field coil dynamo € 2,00 | ||
| Old model, 1940/1950's, LUCAS splitted type connector € 1,00 | ||
| Spring for choke lever MK2 carburettor € 5,00 | ||
| Pipe tool 1/2 AF, rigid € 17,00 | ||
| 34 mm Inlet manifold straight, one side 2 bolts, other side for rubber € 20,- | ||
NORTON |
||
| Modification to AMC gearbox outer cover
all models 1956 upto 1974. Fitting a real oilseal for the kicktart and for the gearchange shaft, including new gaskets, no more leaks, all in for € 50,00 |
||
| Small support bracket front mudguard/webb fork 16H € 6,00 | ||
| Kork insert clutch sprocket upto approx 1962 € 4,00 | ||
| Worm nut, for clutch operating mechanism, in gearbox upto 1955 € 15,00 | ||
| Short throttle cable, for two monobloc carburettors € 4,00 | ||
| Kickstart shaft, upto 1955 € 32,00 | ||
| Leakfree housing rev. counter drive Commando 1971-onwards € 45,00 | ||
| Front hub assembly with TWO floating disks € 455,00 | ||
| Engine sprocket single 19 teeth (various models) € 31,00 | ||
| Brake rod bare featherbed stainless steel € 12,00 | ||
| Battery maintenance free Commando MK3, 30 procent more capacity € 97,00 |
||
| SET hardchrome frontfork stanchions + all
damping parts This set will give much better damping. For long Roadholders used upto 1956 € 280,00 |
||
| Handlebar Euro Commando MKIII € 27,00 | ||
| Long bolt airfilter Commando upto 1971 stainless steel € 4,00 | ||
| Adjuster isolastic MK3 Commando stainless
steel € 14,00 All MK3 isolastic parts now available in stainless steel. |
||
| Set rubber rocker box cover gaskets twins reusable € 7,00 | ||
| Forked pusher assy, rear brake master
cilinder MK3 Commando stainless steel € 33,00 |
||
| Conrod 650 + 750 + 850 twin heavy duty quality € 250,00 | ||
| Conrod 500 + 600cc twin heavy duty quality € 250,00 | ||
| Rear mudguard CHROME NORVIL type € 135,00 | ||
| Washer large banjo / oiltank all models upto 1970 € 1,50 | ||
| Bottom yoke frontfork Commando 1968-1970 € 245,00 | ||
| Starter motor Commando MK3 new improved stronger model € 660,00 | ||
| Pushrod tunnel late ES2 stainless € 60,00 | ||
| Pushrod tunnel early ES2 stainless € 60,00 | ||
| Drainbolt primairy chaincase featherbed stainless € 3.00 | ||
| Outer primairy chaincase MK3 Commando € 270,00 | ||
| Silencer STAINLESS STEEL Commando roadster (peashooter) 165,00 | ||
| SET exhaust pipes Commando roadster
upswept no balance STAINLESS STEEL € 140,00 |
||
| Valve guide ES2 / M50 upto 1958 € 12,50 | ||
AJS + MATCHLESS |
||
| Burman gearbox sprocket 1938 upto 1956, in 18 or 19 teeth € 28,00 | ||
| Modification to AMC gearbox outer cover
all models 1956 upto 1974. Fitting a real oilseal for the kicktart and for the gearchange shaft, including new gaskets, no more leaks, all in for € 50,00 |
||
| Drive side shaft for crank, 1957 only + trials 1957 on € 57,50 | ||
| Steel plates for petroltank kneegrips AJS upto 1957, set € 11,00 | ||
| Oil pipe supply, oiltank to engine, rigid models upto 1948 € 37,00 | ||
| Oil pipe return, engine to oiltank, rigid models upto 1948 € 37,00 | ||
| Bush for kickstart shaft outer cover CP gearbox € 19,00 | ||
| Bush for kickstart shaft inner cover CP gearbox € 16,00 | ||
| Speedo bracket upto 1950 € 18,00 | ||
| Set headlamp brackets 1955-1963 € 56,00 | ||
| Drainbolt stainless oiltank or B52 gearbox € 3,00 | ||
| Srew set outer cover B52 gearbox stainless € 13,00 | ||
| Allen bolt set outer cover B52 gearbox stainless € 13,00 | ||
| Silencer 350c rigid frame WD, no chrome € 90,00 | ||
| Exhaust pipe 350cc rigid frame WD over footrest, no chrome € 55,00 |